We can always use more storage and more counterspace right? How about building a dedicated pantry cabinet that doubles as more serving space? Today I'm sharing this freestanding kitchen pantry cabinet with free plans.
I've partnered with Build Something to bring you step by step plans so you can build this kitchen pantry cabinet. Build Something is full of project plans by space and type so you can find inspiration for nearly any room in your home. Before you head over there to check out the plans for this pantry cabinet be sure to read through my building tips below.
With the doors closed you would hardly suspect this cabinet is full of food storage! And it's not meant for just the kitchen, you could use it in your office, craft room or work space too.
The doors are plenty deep at 7 1/4" for multiple cans and boxes. I opted to not paint the interior because I think food always looks more enticing and easier to find against a white or neutral background. The exterior is painted in Benjamin Moore polo blue advance satin.
Below are a few notes and tips from the building process I suggest you read through before beginning.
The bottom / base of this cabinet has notches cut out for the side panels. Follow the plans for dimensions and use a jig saw or 4" hand held circular saw to make the cuts.
* This post contains affiliate links below, by clicking on an affiliate link and making a purchase I may receive a tiny commission. This small commission helps me keep this site full of free content so I thank you for your support. *
Once the bottom is notched then add the pocket holes.
Above is the constructed carcass. I choose to have one fixed shelf because it adds to the strength and stability of the cabinet. The second shelf is movable and I definitely recommend using the Kreg Shelf Jig to make the shelf pin holes:
Mark the cabinet sides equally then place the Shelf Pin drilling jig up against the side and set the collar depth on the bit. You should clamp the jig in place to ensure exact spacing and then drill the holes.
Perfectly lined up shelf pin holes with zero tear out. Insert the shelf pins and then add your shelf.
The doors are constructed using all pocket holes. Be sure to keep the pocket holes to the underside and interior of the shelf trim to keep them hidden.
Add the backing and trim then apply putty to fill any holes. Sand smooth and paint.
For the hinges I recommend full wrap cabinet hinges. I used partial wrap hinges here because when I ordered the hinges I was thinking they might be placed on / near the shelf trim and that limits the full wrap. Alas that would only happen if you opted for 3 hinges on each side, the middle hinge would definitely hit the shelf trim and need to be a partial wrap. Otherwise I would use full wrap hinges for more support (I ordered them but they didn't arrive in time for photos. )
Also you will need a magnetic latch at the top center and possibly at the bottom as well depending on how heavy your doors are once full.
I hope you enjoyed this project. Please leave any questions in the comments below along with your email address and I will respond. The complete plans can be found here.
SHOP THIS POST:
Disclaimer: I partnered with Build Something to make this post possible. I received product and / or compensation however all thoughts and opinions are my own.